1、蓄電池的保養檢查:檢查蓄電池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is firmly fixed.
2、輪胎的檢查:每月應在常溫下檢查一下輪胎氣壓。
2. Tyre inspection: check the tyre pressure at room temperature every month.
3、離合器總泵液面的檢查:離合器液面介于高、低液面間則表示正常,如果低于標準線,則可能是總泵或分泵皮碗損壞。
3. Check the liquid level of the clutch master cylinder: if the liquid level of the clutch is between high and low, it indicates that it is normal. If it is below the standard line, it may be that the master cylinder or slave cylinder cups are damaged.
4、制動液面的檢查:制動也在高、低位之間則表示正常。
4. Check the brake fluid level: if the brake fluid level is between high and low, it means that it is normal.
5、混凝土自上料攪拌車發動機冷卻液液面檢查:混凝土自上料攪拌車發動機在熱機狀態時,千萬不要打開散熱器蓋,否則可能會(huì )被濺出的冷卻液或高溫蒸氣燙傷。等發動機冷卻后,檢查冷卻液的液面應處于滿位和低位之間,否則應加蒸餾水或純凈水或冷凍液,加水后的液面高度不能超過滿位。如發現短時間內冷卻液減少的很快攪拌,自上料攪拌車怎么檢修應檢查冷卻系統是否有泄漏或到維修站去檢查混凝土自上料攪拌車。
5. Check the coolant level of the engine of the self feeding concrete mixer truck: Never open the radiator cap when the engine of the self feeding concrete mixer truck is hot, otherwise it may be scalded by the spilled coolant or high temperature steam. After the engine cools down, check that the coolant level should be between full and low, otherwise add distilled water or purified water or refrigerant, and the liquid level after adding water should not exceed full. If it is found that the cooling liquid decreases in a short period of time and is mixed quickly, how to repair the self feeding mixer truck should check whether the cooling system leaks or go to the maintenance station to check the self feeding mixer truck of concrete.
This article is provided for you by the automatic feeding mixer. Our website is: http://www.shanqijituan.com/ We will serve you with wholehearted enthusiasm and welcome your visit