目前市場上的自動攪拌一體機種類眾多,不同的攪拌機工作原理不同,其運轉方向也不盡相同。中科就常見的強制式和滾筒式攪拌機的運轉方向做詳細介紹。
At present, there are many kinds of automatic mixing machines in the market. Different mixers have different working principles and different operation directions. Zhongke introduces in detail the operation direction of common forced and drum mixers.
1.強制式自動攪拌一體機
1. Forced automatic mixing machine
當強制式攪拌機啟動開始轉動之后,在葉片的轉動帶動下,投入到攪拌機內的物料在兩個拌合筒中上下的翻滾,做規則的圓周運動;與此同時,葉片之間的相互錯開的位置關系讓混合料在攪拌轉動中能夠變換位置,在葉片重疊的位置上混合物會在葉片的推動下以及轉動軸的攪動下從一個旋轉平面向另一個旋轉平面運動。這樣的復雜攪拌過程使得混合料能夠更加有效的、更充分的進行混合和攪拌,實現攪拌均勻,保證了混凝土的攪拌質量。
When the forced mixer starts to rotate, driven by the rotation of the blades, the materials put into the mixer will roll up and down in the two mixing drums and make a regular circular motion; at the same time, the staggered position relationship between the blades enables the mixture to change its position in the mixing rotation, and the mixture will be driven by the blades at the overlapping position It moves from one rotating plane to another under the agitation of the rotating axis. Such a complex mixing process makes the mixture more effective, more sufficient for mixing and mixing, to achieve even mixing, to ensure the quality of concrete mixing.
強制式混凝土攪拌機的運轉方向示意圖:
Schematic diagram of operation direction of forced concrete mixer:
2.滾筒式自動攪拌一體機
2. Drum type automatic mixing machine
滾筒式自動攪拌一體機為攪拌筒的構造,簡體為雙錐形,筒內焊有高、低葉片,分別與拌筒軸線成一定夾角。攪拌進,隨著拌筒旋轉,葉片使物料在提升、下落的同時,又作軸向往復攪動,因此攪拌強烈,效果較好。其運轉方向為正方向攪拌而反方向出料。
The drum type automatic mixing machine is the structure of the mixing drum. The cylinder is biconical. There are high and low blades welded in the drum, which form a certain angle with the axis of the mixing drum. With the rotation of the mixing cylinder, the blade makes the material rise and fall, at the same time, it makes the axial reciprocating stirring, so the stirring is strong and the effect is good. Its running direction is mixing in positive direction and discharging in opposite direction.
中科提醒用戶在啟動攪拌電動機時,運轉方向應與標牌指示方向一致,如方向不對,應改變電源接線。
Zhongke reminds users that when starting the mixing motor, the running direction should be consistent with the direction indicated on the label. If the direction is wrong, the power wiring should be changed.